Audio Networking for Radio
Designed to work with Wheatstone’s groundbreaking WheatNet-IP IP-based networking system, the ip88cb provides audio I/O with appropriate connectorization and DSP Mix Engine functions for Wheatstone Control Surfaces. A single ip88cb is all that’s needed for all but the busiest of studios. When paired with Wheatstone’s new E-1 control surface console, the ip88cb provides a standalone/networkable solution for under $10K.
The ip88cb is all about convenience. With XLR’s for mic inputs and monitor outputs, 1/4" TRS for sends to headphone and cue amps, and Studio Hub compliant RJ45’s for all the general purpose analog and digital I/O, the ip88cb is essentially a plug and play console in a box. Just plug the Console Blade and the control surface of your choice into an Ethernet switch and you’re ready to go. As with all of our Blades, there are two eight channel software mixers built in, so you could use the ip88cb all by itself to have a software controlled 8x8 mixing router with AES and Analog I/O.
The ip88cb has an extensive feature list that provides powerful interface options including AES Inputs, 4 Stereo Analog Inputs, 4 AES Outputs, and 4 Stereo Analog Outputs on RJ45s, Control Room and Studio Stereo Analog Outputs on XLR’s, 2 Mic Level Inputs with Gain Trim and switchable Phantom Power on XLR’s, Cue and Headphone outputs on both RJ45 and 1/4” TRS and 12 GPI Logic Ports on RJ45.
All of this I/O and mixing is contained in a single RU enclosure with extensive front panel metering, status displays, headphone output, and programming menu control.
| Click an image below to enlarge it to the full width of your screen. While the image is enlarged, you can hover your mouse cursor over it to magnify the picture. | |
 IP-88cb Front PanelIP-88cb Front Panel |
 IP-88cb Rear PanelIP-88cb Rear Panel |
